30-40 Anchor Windsor Stone® Wall Blocks from Pavestone
Chisel and Hammer
Step By Step
Step 1: Place the rigid liner in the desired location and mark where the wall blocks should rest. Place the base row 6” away from the bottom of the liner.
TIP: To prepare the base row on a solid surface, the rear "lips" of the block must be removed by striking them with a sledgehammer (approximately 10 stones).
Step 2: Begin building the next tier of the pond wall.Each block has a “lip” located on the back of the stone. This lip creates a “lock” effect. When placing the lip down, make sure it is centered over the gap of the bottom tier. Repeat step three for the third and fourth tiers
TIP: The seams should not line up when creating the second, third and fourth tiers.
Step 3: Add Complete Filter Box with Pump. Fill the rigid liner with water to 2" below the top of the liner.
Step 4: (Optional) Add spitter using the diverter valve and 1/2 in. tubing.